终于找到了把900通话时间清零的办法,并把D900改成superCID让你随意刷机

手机, superCID, 电脑, usb, 通话时间

---------------------------------------------------------------------
HTC Universal SIM Unlock test release
---------------------------------------------------------------------
Purpose:
This software can be used to remove the Operator SIM lock from HTC Universal based telephones.
The software is only intended for use on this device.
This software is free to use, but at your own risk.
This release is for test purposes only to ascertain device compatibility at this stage.
Website:
http://buzzdev.net
Warning:
The unlock procedure requires you to reflash your Universal. Although the unlocking procedure itself should be safe, you are advised to take a full backup of all device data before use.
Buzzdev.net takes no responsibility for any conflict, fault, or damage caused to your phone by this unlocking procedure. It may invalidate your warranty. Full caution is advised.
Install Instructions:
1. Backup your phone (not necessary, but advisable).
2. Remove your SD Card.
3. Enter bootloader mode on your Phone. To do this, simultaneously hold down the backlight key (The key, next to volume key), the power key and soft reset the phone. Your phone screen should clear, and you will see very faint writing saying Serial? Let go of buttons etc.
4. Connect your phone to your computer using the USB lead.
5. Run the MaUpgradeUt_noID.exe program ?this will reflash your phone with necessary software required to enable the unlocker.
6. Wait patiently.
7. Once the MaUpgradeUt_noID.exe upgrade completes, soft reset your phone by pressing the soft reset button on the back of the device [if the flash has been successfully applied, you should see that you now have Radio version 0.00.00]
8. Allow your phone to reboot. Once it has, connect to your PC using Activesync, and copy the UNI_Unlock_v1.exe program onto your phone. Alternatively, copy it to an SD card and insert into your phone.
9. Run UNI_Unlock_v1.exe on your phone. Wait patiently.
10. Once the process completes, soft reset your phone.
11. Process is (hopefully) complete!

Credits:
Thanks to:
mamaich - for his great finding, which makes this come true. Everyone please praise mamaich!
itsme - for his wonderful scripts and efforts put into researching
arc - for providing very special tools and interesting stuff
vijay555 - for his constant support on anything and for being my spokesman

))
machinagod - for providing useful stuff and info
mwang - for donating Universal device to me and other support
and all of you guys for being patient

)))

History:
0.1 - Original release

---------------------------------------------------------------------
操作步骤简短翻译
安装说明：
1，备份你手机上的资料。
2，移除SD卡。
3，将手机进入bootloader mode（引导模式）。也就是同时按灯光＋开关＋reset
4，用usb线连接手机和电脑。
5，在电脑上运行MaUpgradeUt_noID.exe程序解锁,这一步，实际上就是把你手机的radio刷成0.00.00。）
6，耐心等待刷新。（大约10多分钟）
7，MaUpgradeUt_noID.exe升级完成，按reset软起（桶PP）。[如果刷新顺利完成，应该可以看到你的Radio（无线通讯模块rom）版本为0.00.00]
8，让你的手机重启。重启后，用Activesync（同步软件）连接到PC上，将UNI_Unlock_v1.exe复制到你的手机中，手机和SD卡皆可。
9，在手机上运行UNI_Unlock_v1.exe。点确定，等待30秒。。。
10，程序运行完成后，软启。
11，OK。大功告成！

附件: 您所在的用户组无法下载或查看附件

收藏分享评分

在淄博，有个修手机的，别人拿智能手机给他修感觉又安全又舒坦，所以送他俩字——“安坦” ^.^

－购机选安坦，您将得到完善的售后服务，良好的交流指导，更多的资源下载！－

回复引用

订阅 TOP

ilikeyou